Instructions for measuring the opening of sliding doors

For the manufacturing of Sliding doors two different sizes are necessary:

a) opening width (W)
b) opening height (H)

The width and height inside the opening are counted as the measurements for the opening. If there are more than two doors, the manufacturer will takes into account and calculate the overlap.

If it appears that the floor or the ceiling is sloping or uneven, please add additional measurements:

a) the width of the opening from the top
b) the width of the opening from the bottom
c) the height of the opening from the left
d) the height of the opening from the right
e) if the outcome varies, we recommend to measure from the middle as well

If the height of the door is different from the right and the left, then the door is prepared by the smaller size.
However with the width we take into account the larger distance. (We recommend to present all the measurements when ordering).

---

 

Instructions for measuring wardrobe:

For shelving preparations for a room defined by walls or a niche, it is necessary to get three different measurements for the opening:

a) opening width (W)
b) opening height (H)
c) hole depth (D)

Since we are dealing with a module cabinet the width, height and depth are particular and there is no need for specific measurements.

Shelves depth is 35cm, width 60cm, height 200cm or 100cm. Tubes for hangers come in according to the width of the cabinet.